-10%
,

PREVENTA ToothPick Micro Frame by Kabab FPV

Disponible para reserva


$904.43 $1,005.33

Recibir aviso de stock

ULTRA LITE, UBER FUN , PRETTY SAFE! by KababFPV

There is couple different ways of building the Toothpick frame,
The main difference is choosing your CAMERA / VTX combination and the other items to make the mounting a breeze.
The below two options are the 2 different ways of building the Toothpick.
We broke down every item with links to make it as easy as possible for you to put together your Toothpick list.

OPTION 1 AIO CAM/VTX BUILD:
(photo to give you an idea of how it will look built)

Toothpick Micro Frame x 1
Hyperlite Toothpick motors x 4
Crazybee F4 AIO Flight controller -F4 PRO (1-2S) OR F4 PRO V2 (1-3S)
Happymodel HCF7 AIO Camera/VTX unit
Newbee Drone Whoop Camera mount (VERY MINOR MODIFICATION IS REQUIRED TO THE MOUNT)
65mm Prop with 1.5mm mounting hole by WHOCARES

OPTION 2 INDIVIDUAL CAM VTX BUILD:
(photo to give you an idea of how it will look built)

Toothpick Micro Frame x 1
Hyperlite Toothpick motors x 4
Toothpick Canopy for EOS and similar cameras
Crazybee F4 AIO Flight controller -F4 PRO (1-2S) OR F4 PRO V2 (1-3S)
iFlight Succex Micro F4 flight tower (note if you go with this option, you will not need to buy another VTX as this stack comes with one)

Caddx EOS2 Camera or Runcam Racer Nano (will be available soon)
VTX OPTIONS:
-Happymodel 25mw-200mw Whoop VTX 
-TBS UNIFY NANO 5G8 or TBS NANO PRO32 5G8
ANTENNA OPTIONS:(The above VTXs include linear antennas, but if you want a better perfroming antennas please consider the following)
-TBS 5G8 MICRO U.fl Antenna
-Lumenier Micro Axii Shorty LHCP
-Lumenier Micro Axii Shorty RHCP
65mm Prop with 1.5mm mounting hole by WHOCARES

Recommended Batteries:
GNB 450mAh 2S
GNB 520mAh 2S
GNB 620mAh 2S (will be available soon)

 

Recommended props:
65mm Prop with 1.5mm mounting hole by WHOCARES

 

 

The Toothpick will fit specifically four hole motor mount patterns of M2 with 9mm diameter like the (Hyperlite Toothpick motors) or 8mm diameter M1.4 pattern and the AMAXinno 3 hole M2 mount pattern.

FC mounting patterns:
25.4 x 25.4mm – (Crazybee F4 and Crazybee F4 V2)
16x16mm (iFlight micro F4 tower)

Things included with this:
– The frame.  2mm carbon fiber in ‘oil rubbed’ finish.
– The following hardware:
4x Steel M2x15mm
4x Steel M2x20mm
4x Steel M2 locknut
16x M1.4x4mm screws
16x M2x4mm screws
(steel because plastic/nylon breaks too easily)

Frame weight: 5.5 Grams (without hardware)

Categorías: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PREVENTA ToothPick Micro Frame by Kabab FPV”

There are no reviews yet.