This 12 cm (4.5″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application.
Overview
This cable is designed to work with our Micro Metal Gearmotor Encoders with top-entry connector and with side-entry connector. It consists of six 28 AWG color-coded wires that are terminated on one end by a female JST SH-type connector.
 |
The other ends of the wires are unterminated and can be cut to match the length of your application. You can use our male or female crimp pins and crimp connector housings to make a connector for the unterminated end of the cable that is compatible with standard solderless breadboards, perfboards, 0.1″ male headers, and 0.1″ female headers.
Use with Micro Metal Gearmotor Encoders
When used with our encoders, the wire color scheme is as follows:
 |
| Color | Function |
|---|---|
| Red | motor power (connects to one motor terminal) |
| Black | motor power (connects to the other motor terminal) |
| Blue | encoder Vcc |
| Yellow | encoder A output |
| White | encoder B output |
| Green | encoder GND |
For more information on how to use the encoders, see the encoder product pages.
Dimensions
| Pins: | 1×6 |
|---|---|
| Length: | 12 cm |
| Weight: | 1 g |
General specifications
| Gender: | Female-unterminated |
|---|---|
| Wire gauge: | 28 AWG |
| Connector: | JST SH-type |
There are no reviews yet.