This is the step-down and step-up integrated voltage regulator, specially designed for FPV related application. Typical application: Powering video TX or camera where using 12V inputs with 2-6S Lipo.
Output voltage：mode 1: 1.25-30V adjustable; mode 2: fixed output (can be set to 1.25 to 30V)
Output current：constant 1A (when output at 12V); 1.5-2A when output is set to 5V.
Input current: 2A (MAX)
Output power: 12W under natural cooling condition and input voltage higher than 10V, 20W with heat sink.
Idle current: 10mA ( under 10-14V input and 12V output)
Working temperature： -40℃ to +85℃ （output power within 10W ）
Wrong polarity protection: No, wrong polarity will burn the PCB directly.
Dynamic respond speed：5% 200uS
Short circuit protection：Yes (10 seconds)
Size: 5x2.3x1.1 cm (excluding potentiometer)
* Please note: This device is for experienced electronics DIYers and requires electronic knowledge and soldering skills. You are responsible for ensuring that it is correctly wired and soldered.