THIS IS THE NEW 32-CHANNEL EDITION OF 5.8G 600mW A/V WIRELESS SYSTEM.
- 32 channels, more channel resources.
- TX is compact in size, also using no-fan design, makes it very good for aerial video recording application.
- LED channel number display on both TX and RX, avoiding short range issue caused by mis-matching channels on TX and RX modules using switches.
FPV 5.8G 600mW A/V Transmitting/Receiving System TS832 + RC832 - 32CH Edition | RP-SMA
video format supported: NTSC/PAL
Antenna connection: RP-SMA, jack (module side, both TX and RX) See connector type diagram
TX TS832 specs:
Power input: 7.4-16V (3S Lipo suggested)
Transmitting power: 600mA
Antenna gain: 2db
Working current: 220mA at 12V
Video bandwidth: 8M
Audio bandwidth : 6.5M
Dimension: 54x 32x 10mm(excluding antenna)
*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.
1 x transmitting unit (TX)
1 x antennas (2db)
1 x basic wires set