RC Juampa Mi Cuenta  Ver Cesta  Realizar Pedido  
  Inicio » Catálogo » Balanceadores » HP-EOSLBA10A Mi Cuenta  |  Ver Cesta  |  Realizar Pedido   
* Ofertas !! * (8)
Accesorios-> (296)
Aviones (9)
Balanceadores (9)
Baterías LiPo / LiFe (65)
BECs (7)
Carbono (9)
Cargadores (28)
Combustible (9)
Conectores (12)
FPV / UAV-> (118)
FPV Racing-> (86)
Gyros (3)
Hélices-> (203)
Helis-> (96)
Merchandising (3)
Motores Brushless (24)
Motores Glow-> (23)
Motores Nafteros-> (46)
Multicópteros-> (151)
Packs NiCd (2)
Radios-> (37)
Receptores-> (34)
Servos-> (53)
Simuladores (1)
Speed Controls (16)
Búsqueda Rápida
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
Hyperion EOS LBA10 Balance Charge Adapter 2S~6S 10A Max

  • New balance unit from Hyperion
  • Charge with 10A
  • Network 2 LBA10 for 12S balancing
New Hyperion EOS LBA10A Net - The Most Powerful, Versatile Balance-Safety Adapter for Lithium Packs. Max 6S, 10A rating - Network 2 units for 7S~12S balancing.

The Hyperion EOS Lithium Balance Adapter 10 (LBA10) is the newest, most feature-packed and reliable lithium balancer on the market today, and comes at a bargain price. Simply put, it is the most powerful, versatile, and safest way to charge your lithium packs. A single LBA10 provides three ways to balance your lithium packs from 2S to 6S, at a maximum of up to 10-ampere rate!

Or, you can network two LBA 10 together with NET cable and adapter pack #HP-EOSLBA10-MSC. Set one LBA10 to Master and one to Slave mode. Series the LBA input leads together, and connect to a charger with appropriate S rating. Now you can charge two packs of same cell type and capacity (such as 6S and 6S) at the same time, and every cell in both packs will be balanced to the other when charging is done. Connect the packs in series and fly, with balanced packs from 7S to 12S in this way!

Or, say you have two 5S chargers, and want to charge two 5S packs to connect and fly as 10S. Use each LBA10 in Master mode, and connect each to a separate charger and battery. When charging is finished, Connect the two LBA10 together in Master-Slave configuration, and connect them to the just-charged lithium packs. The LBA10 will work together until every cell in the two packs are balanced together, then automatically shut down. Takes only a few minutes. Now series the packs together and fly in peace!

Each LBA 10 comes with balance harnesses for 2S and 3S packs. For 4S to 6S packs, get the appropriate optional harnesses from these part numbers:


The LBA 10 also has a DataPort (use optional cable HP-EOSLBA10-DPC) which will allow you to monitor the individual cell voltages while you balance, using the LCD screen of any HYPERION charger which has DataPort option.

Este producto esta en nuestro catálogo desde miércoles 27 septiembre, 2006.
Comentarios Producto no disponible en este momento
Clientes que compraron este producto, también han comprado
Hélice eléctricos APC 10x7E
Hélice eléctricos APC 10x7E
Hyperion Servo Ext Wire 6m Pack Std 22ga
Hyperion Servo Ext Wire 6m Pack Std 22ga
Hook and Loop Tape/600 Use
Hook and Loop Tape/600 Use
Pinza Ball Links Align
Pinza Ball Links Align
GAUI 330X Aluminum Frame Post PM 2x3.5x20.2
GAUI 330X Aluminum Frame Post PM 2x3.5x20.2
Hyperion Pack Connector, 3-pin standard servo plug
Hyperion Pack Connector, 3-pin standard servo plug
Conector Deans Ultra Hembra
Conector Deans Ultra Hembra
Hélice eléctricos APC 9x4.7SF
Hélice eléctricos APC 9x4.7SF
Compras más
0 productos
Otros productos
Notificaciones más
NotificacionesNotifiqueme de cambios a Hyperion EOS LBA10 Balance Charge Adapter 2S~6S 10A Max
Díselo a un Amigo
Envía esta pagina a un amigo con un comentario.
Novedades más
KISS FC V2 - 32bit Flight Controller
KISS FC V2 - 32bit Flight Controller

Copyright © 2018 RC Juampa
Powered by osCommerce