This is Perry's Regulating Pump, which is Used to Ensure Consistent
Fuel Flow to 2-cycle Engines.
This is used with Glow Fuel Only!
FEATURES: This pump will provide fuel flow in any attitude, tank
position, or fuel level.
Helps improve plug life and fuel economy.
Works with any engine with a good mid-range of RPM.
Requires tapping of the engines crankcase and installation
of the pressure fitting.
INCLUDES: One Perry Pump Regulator
One 6-32" Crankcase Pressure Fitting.
4" of Semi-flexible Fuel Tubing
SPECS: Measures 35mm long x 25.5mm in diameter.
REQUIRES: One #36 Drill Bit and a 6-32" Tap
COMMENTS: This pump should NOT be used on an engine that is equipped with an
air-bleed type of carb (For Example: some O.S. and Fox Engines).
If you have an air-bleed type carb Perry MAY make a pump carb for
your engine that would work with this pump. This pump may be used,
without modification, with an engine equipped with a low-speed
needle valve (like Super Tigre engines).
Pump Has Three Fuel Fittings:
One Tank To Pump Inlet
One Crankcase To Pump Pressure Inlet
One Pump To Carb Outlet